Gütermann Toldi-Lock Serger Wire - 2,500 m - Green - No. 8375

This green serger yarn, reference no. 8375 from the Gütermann Toldi-Lock range, is the natural choice to finish fabrics in the same family: foliage print cotton, green canvas, dyed denim, lining. The tone is bold, neither yellow nor bluish, and can be easily spotted among your cones.

Technical characteristics

The cone aligns2,500 m of 100% polyesterready for the serger. The label indicates theissue 120: the higher this number, the finer the thread. This results in a light serging rather than a bead on the edge of the fabric. With this length, a single cone covers many garments, an asset when you overlock a lot.

How to use it

• Serge the edges of each piece before assembly on fabrics that are fraying, such as cotton or canvas: the sewing is then done without loose threads.
• To change cones without rethreading the entire machine, tie the new thread to the old thread near the cone, then pull gently until the new thread reaches the needles.
• Test a scrap of your fabric and adjust the tension before starting the garment: a stitch that loops or pulls can be adjusted in a few minutes.

Pair it with white or ecru Toldi-Lock cones for loopers. Complete with a Gütermann polyester sewing thread for assembly.